Newport Solid Fuel Heater
£509.30 Excl. VAT
Newport Solid Fuel Heater
The Newport Solid Fuel Heater by Dickinson Marine is a small stainless steel solid fuel heater designed for casual use ideal for boats 20-25ft. This heater burns one to two 1” thick wood or presto log, a handful of charcoal briquettes. Removable ash drawer and damper control.
- Requires 3” diameter chimney parts.
- Minimum 4ft or maximum 8ft of chimney is required, a 6ft straight run with no elbows work best.
- Chimneys 6ft or longer we highly recommend a barometric damper.
- Permanent fresh air vent needed in the area of the unit.
- Decorative laser cut door.
- Creates a dry heat to dry out the moisture inside the vessel.
- Removable ash drawer for easy cleaning & damper control.
Width: 7.88″
Height: 14.7″
Depth: 10″
Weight: 15 lbs
Heat Output (approx):
Low: 3000 BTU (0.8kW)
High: 8000 BTU (2.3kW)
What size flue does it use?
3″ (KMD16-000) We well them in sections that are 22″ long and they simply ‘couple’ together. The overall length of your entire flue system should be between 4ft and 8ft.
Can i add in bends?
Yes, we do the 45deg bends (KMD16-040) – they are also stainless. Also remember that adding in bends lessens the efficiency of the unit.
What do i use to go through the deck?
We have a proper through deck fitting (KMD16-050) that comes with the dress ring.
What Cowl should i fit?
We have a choice of 3 caps – either the DP or H cap. These are all removeable and can be blanked off with a rain lid
| Weight | 5.4 kg |
|---|---|
| Brand | Dickinson Marine |
Delivery
Delivery for small packets will be with Royal Mail and parcels with DPD.
Freight deliveries will be with Palletways or DPD.
Questions
Always contact us if you are in any doubt on 01663 734800.
